Part 2 Cold rolled steel. Section 1 - Specifications of CRC ready stock

Part 2 Cold rolled steel. Section 1 - Specifications of CRC ready stock

The thickness range of cold rolled steel is 0.15-3.5mm, that above 2.0mm, can consider to take hot rolled pickled steel as the replacement because the price is high. Factories which manufacture cold rolled steel, 0.4-3.5mm -- Chinese governmental factories, below 0.4mm -- only private mills.

As we know, the surface of cold rolled steel is usually two types, black and silver. Black refers to black annealed while silver refers to bright finished. There are also two types in silver surface, one is dark -- SPCC-SD; the other is bright -- SPCC-SB. SD is mainly produced by our governmental factories, means the surface is textured, not so flat; SB is usually produced by private mills which means not textured and it's very flat.

Coil inner diameter: 508/610mm.

Sheet form is very little with stock, if there is, specifications are usually 1250*2500mm. When someone needs sheets with other dimension, processing is also very convenient. The cost of de-coiling is 150-180 RMB with thickness above 0.6mm, that below 0.6mm, with the thinner thickness cost is the higher. Plus short distance delivery, total cost is about 220-280 RMB.

MESCO is the steel material expert by your side. Hope the above-mentioned information is favourable for you. If you have any questions or want to know more, please contact us.

Follow us, get what you want to know!

Website:www.mescosteel.com.cn

mesco02@aliyun.com