




Writing Board Steel Sheet (Prepainted Galvanized)
| Share | |
|---|---|
| Categories | Color Coated Steel |
| Brand | MESCO: Trusted Steel Wholesale Manufacturer |
| Substrate | Prepainted galvanized steel |
| Standard Colours | White / Green / Black |
| Common Thickness | 0.3 / 0.35 / 0.2 / 0.26 mm |
| Width | 1000 / 1200 mm |
| Coating Film Standard | 22-26/5; 12-15/0; 12-15/5 um |
| Pencil Hardness | 5H (6H green board); 4H (5H green board) |
Prepainted Galvanized Steel · Writing Board Grade
Writing Board Steel Sheet
For writing board manufacturers, the steel sheet is not a commodity input. It is the surface the end user writes on and wipes clean every day. Coating film, pencil hardness, gauge and width therefore need to be fixed as a written specification before production, rather than renegotiated shipment by shipment.
MESCO supplies prepainted galvanized steel sheet for writing board fabrication with three documented coating-film and pencil-hardness combinations, three standard colours, four common thicknesses and two standard widths. The result is a clear, repeatable basis for enquiries and repeat orders.
Writing board sheet is a galvanized, colour-coated steel substrate supplied in white, green or black. It is delivered as an input material for board manufacturers and fabricators for downstream cutting, framing and assembly, not as a finished consumer board.
Key Specification at a Glance
Every value below is a stated option from the standard writing board grade, not an indicative range.
Prepainted Galvanized Substrate
Galvanized colour-coated base sheet specified for writing board production.
White / Green / Black
Three standard colours. The green option carries a higher pencil hardness grade.
1000 / 1200 mm Width
Two standard widths combined with four common thickness options.
4H to 6H Pencil Hardness
Hardness is defined per coating build and per colour, so it can be written into an RFQ.
Technical Specification
Base Specification
| Product | Writing board sheet |
|---|---|
| Substrate | Prepainted galvanized steel (galvanized colour-coated base sheet) |
| Standard colours | White / Green / Black |
| Common thickness | 0.3 / 0.35 / 0.2 / 0.26 mm |
| Width | 1000 / 1200 mm |
Coating Film and Pencil Hardness
| Coating film standard (µm, as listed) | Pencil hardness, standard board | Pencil hardness, green board |
|---|---|---|
| 22-26 / 5 | 5H | 6H |
| 12-15 / 0 | 4H | 5H |
| 12-15 / 5 | 4H | 5H |
Film thickness values are reproduced exactly as shown in the standard specification. All hardness figures are pencil hardness grades; the green-board value applies to the green colour option.
Choosing the Right Coating Build
Three coating builds are available, each tied to a defined hardness grade. Pencil hardness is a comparative, standardised measure of a coating's resistance to indentation and scratching; a higher H number denotes a harder film.
22-26 / 5 µm → 5H, or 6H on green board
The highest hardness grade in the range. Specify it when the finished board surface is subject to frequent, heavy writing and cleaning.
12-15 / 0 µm → 4H, or 5H on green board
A lighter build for standard-duty writing boards.
12-15 / 5 µm → 4H, or 5H on green board
The same hardness grade with the additional film layer shown in the specification.
Because the green option is rated one grade higher in every build, colour and hardness requirements should be decided together at RFQ stage rather than treated as separate line items.
Applications
Writing board sheet is an input material for board manufacturers and fabricators. Typical downstream uses include:
- Framed and frameless writing boards
- Classroom and lecture-hall boards
- Office and meeting-room boards
- Training and presentation panels
- Notice and display panels
Selecting from the standard thickness, width and colour combinations keeps the order aligned with the published grade. State the required colour, coating build, thickness, width and quantity in your enquiry so the specification can be quoted precisely.
Working With MESCO
Since 2007, MESCO has supplied coated steel products to export markets. We put the specification data up front so technical buyers can compare grades, issue a precise RFQ and re-order against the same parameters without re-specifying the product each time.
For a quotation or a technical data sheet, contact mesco@mescogroup.com.cn with your required colour, coating build, thickness, width and quantity.
Frequently Asked Questions
What is writing board steel sheet?
A prepainted galvanized steel substrate used by board manufacturers to produce white, green and black writing surfaces. It is supplied as a raw material, not as a finished framed board.
Which colours are available?
White, green and black are the standard colours. The green option carries a pencil hardness one grade higher than the other colours in each coating build.
What thicknesses and widths are standard?
Common thicknesses are 0.3, 0.35, 0.2 and 0.26 mm, and standard widths are 1000 mm and 1200 mm.
What pencil hardness can I specify?
Three builds are listed: 22-26 / 5 µm at 5H (6H on green board), and both 12-15 / 0 µm and 12-15 / 5 µm at 4H (5H on green board).
Does the green board use a different hardness grade?
Yes. In all three builds the green board is rated one grade higher, 6H instead of 5H, or 5H instead of 4H.
Request a Quotation
Send us the colour, coating build, thickness, width and quantity you need, and our team will respond with the available specification options.
- 加载中···
- Phone
- *Title
- *Content



