Home / All
Stainless Steel
53 results
ViewShowcase
Alloy C-276 (UNS N10276 / 2.4819) nickel alloy plate, tube, bar and fittings to ASTM B574, B575, B622 and B626.
Inconel 625 (UNS N06625) pipe and tube: 235 stocked sizes, 1.58-168 mm OD, 0.29-24 mm wall, seamless and welded.
Solar reflector laminated steel sheet: 20,000 h anti-aging test, 80%+ solar reflectance, 200+ GU gloss, stable film adhesion.
High-gloss red PE coated aluminum sheet in 3003/5052 for fire truck bodies. 2.0-2.2 mm, 90 degree bend guaranteed.
Kraft paper laminated aluminum coil for pipe insulation: 3003 H14/H24/H16, 0.5-1.0 mm, 1.02 mm paper, 914/1000/1200 mm.
Hot-rolled Q355 steel Y-post (star picket), hot-dip galvanized, pre-punched holes, spear point for drive-in fencing.
Aluminized silicon perforated sheet: Al-Si coated steel punched to your drawing. Heat and corrosion resistant for exhaust use.
PSMB aluminum jacketing: 3003 H14/H24/H16, 0.5-1.0 mm, 0.08 mm PolySurlyn film, blue/orange/pink, orange peel option.
Al-Mg-Mn aluminum roofing sheet, 3003/3004/3104 H24/H44, 0.8-1.2 mm, PVDF or polyester coated, 65-430 profiles.
PVDF fluorocarbon color coated aluminum coil, factory direct. 1T bend, 9J impact, 1000h salt spray, 2000h UV tested.
Muffler steel tube in 409/439/304 and aluminized 409/441. Round, oval, mandrel-bent. Custom length.
Round stainless steel pipe in 304/316L, welded & seamless, ASTM A312/A213. Schedule 5S-80. Mill, polished, BA.
Cold and hot rolled stainless steel sheet in 304/316L/430/201. 2B, BA, No.4 finishes. Custom thickness and slit edge.
Ultra-thin stainless steel foil 0.02-0.10 mm in 304, 316L and 430. Bright annealed, slit-to-width, pancake coil or spool.
ASTM A213 stainless heat exchanger tubes in 304, 316L, 321 and 310S. U-bend and straight, bright annealed, eddy-current tested.
Triwall pan: 0.6 mm brushed S/S inner wall, 1.5 mm aluminium thermocore, 0.4 mm polished copper outer, 0.5 mm S/S 430 base.
Prefabricated steel structure warehouses and workshops with PPGI/PPGL cladding. Portal frames up to 60 m span.
Structural steel sections: H beams, I beams, angles and channels in Q235B/Q355B. GB, JIS, EN and ASTM standards.
Grain oriented and non-oriented electrical silicon steel, 0.20-0.50mm. Low core loss grades for transformers and motors.
PPGL steel coil and sheet with AZ50-AZ150 galvalume substrate. PE, SMP and PVDF paint systems for roofing and cladding.
Powder coated steel sheet and coil with epoxy and polyester powders, 60-120um coating in full RAL colors. Zero-VOC finish.
VCM steel sheet with PVC/PET film laminating for refrigerator doors and appliance panels. Wood grain, matte and gloss finishes.
Custom SS+Al+SS tri-ply cookware discs for frypans, saucepans and pots. 304/430 outer with 1060 aluminum core.
Wear-resistant steel plate in NM400, NM500 and equivalent grades. Hardness 360-530 HB for mining and earthmoving.
Categories
- Stainless Steel
- Aluminized Steel
- Aluminum Coil
- Zn-Al-Mg steel(ZAM steel)
- Composite Steel Plate
- Laminated Steel Sheet
- Color Coated Steel
- Galvanized Steel (GI Steel)
- Galvalume Steel(GL Steel)
- Cold Rolled Steel Sheet / Coil (CR Steel)
- Hot Rolled Steel Sheet / Coil (HR Steel)
- Industrial Pure Iron Sheet / Coil
- Enamel Steel Sheet (Porcelain Enamel Steel)
- Steel Pipe & Tube (Carbon)
- Weathering / Corten Steel
- Diffusion & Infiltration Process (Zinc / Aluminum)
- Alloy Steel
- Other Steel Products (Spring / Structural Grade)
- Mechanical Equipment
- Container House & Modular Building